Installing our Rock Lights?

Installing HTX Lighting's plug-and-play rock lights is a straightforward process that enhances your vehicle's visibility and aesthetics. Follow these steps to ensure a successful installation:

Tools and Materials Needed:

• HTX Lighting Rock Light Kit (includes lights, wiring harness, and controller)
• Basic hand tools (screwdriver, wrench set)
• Drill with appropriate bits (if mounting requires drilling)
• Zip ties or cable clamps
• Protective gloves and eyewear

Step-by-Step Installation:

1. Unpack and Inspect the Kit:

   • Ensure all components are present and free from damage.

2. Plan the Installation:

   • Decide on the mounting locations for each rock light, typically within wheel wells, underbody, or other desired areas.
   • Consider the routing path for the wiring harness to avoid heat sources, moving parts, and sharp edges.

3. Mount the Rock Lights:

   • Position each light in the predetermined location.
   • Secure the lights using the provided hardware. If drilling is necessary, ensure not to damage any underlying components.

4. Route the Wiring Harness:

   • Connect the wiring harness to each rock light.
   • Run the harness along the vehicle's frame, securing it with zip ties or cable clamps.
   • Ensure the harness reaches the engine bay or designated area for the controller.

5. Install the Controller:

   • Place the Bluetooth/App controller in a dry, accessible location.
   • Connect the wiring harness to the controller.

6. Connect to Power:

   • Attach the controller's power leads to the vehicle's battery or an appropriate power source.
   • Ensure all connections are secure and properly insulated.

7. Test the System:

   • Power on the system and use the HTX Lighting app to verify each light functions correctly.
   • Adjust settings as desired within the app.

8. Finalize the Installation:

   • Double-check all connections and mounting points.
   • Secure any loose wiring and ensure everything is properly fastened.